Description
Bare engine block from a 2008 Dodge Challenger SRT8. All of the threaded bolt bosses and mounting points are intact and undamaged. The cylinders are standard bore, and still show good crosshatching throughout all cylinders. There are no deep gouges or marring anywhere in the cylinder walls, but there is some light staining in a few of the bores, so having the cylinders checked by a machine shop is recommended. All of the gasket mounting surfaces are in good shape with no major damage. The lifter bores appear to be in good condition with no deep gouges or areas of concerns, and all 16 lifters came out smooth and without issue when the engine was disassembled. The main journals appear to be in good condition, and when disassembled there were no spun bearings or any signs of excessive heat on any journal. All 8 piston oil squirters are intact and undamaged. Assembly comes as shown, and includes all five main bearing caps and bolts. This block should be checked by a professional machinist prior to installation as it may need bored, honed, or other repair. The images are of the actual item you will receive.Below is a slideshow video of more detailed photos of the engine internals and bores. Fits the following vehicles with a 6.1L Hemi engine as a direct replacement: 2006-2010 Chrysler 300 SRT8 2006-2010 Jeep Grand Cherokee SRT8 2006-2008 Dodge Magnum SRT8 2006-2010 Dodge Charger SRT8 2008-2010 Dodge Challenger SRT8 Freight shipping is provided via XPO Logistics to any address within the lower 48 states for $275. A $75 lift gate service fee will be added to all orders being shipped to an address without a loading dock or forklift. No shipping outside the contiguous 48 states. No P.O. boxes. No international shipping. Watch Video Video will open in a new windowUsing the eBay App? Paste link into a browser window: [isdntekvideo]