Engine block from a 2010 Mazdaspeed 3. This block was cleaned and inspected after removal, and has been found to be in good usable condition. The cylinder bores are standard bore. The cylinders have some light scoring marks and some very minor pitting throughout, but do not have any large gouges or any visible structural damage, and still have quite a bit of crosshatching remaining. The photo of the individual cylinder wall is the most scored area of all the cylinders. All threaded and mounting holes are intact and undamaged. The main bearing journals appear to be in good condition, and show no visible signs of excessive heat or any spun bearing damage, and the main cap girdle assembly is included. As with all our used engine parts, we recommend having this inspected by a machine shop prior to use, as it could need boring, honing, or other repair. This block comes exactly as pictured. The photos are of the actual part you will receive. It is recommended to have this block cleaned and checked by a professional machinist, as it may need bored, honed, decked, or possibly other machine work performed. Fits 2006-2007 Mazdaspeed 6, 2007-2013 Mazdaspeed 3 and 2007-2012 Mazda CX-7 with 2.3L DISI turbocharged engine ONLY. No shipping outside the lower 48 states. No P.O. Boxes.